Date | Header | Text |
09-02-2008 | Re: monitor | Hi..pls check if any dry joint at CRT Board (Board attechwith CRT Tube)area..if u need more info..email me..
[email protected]
regrads,
kay
malaysia |
09-02-2008 | dsr400 dalvi decoder | i want to by a dalvi decoder dsr400. can someone tell me where i find one? |
09-02-2008 | User Manual | I have a sony hifi system with 4 pieces and altough they are seperate they are connected through special data cables and behave an indergrated
stereo system. its type is MHC EX5 by sony. does anyone have the manual for this model? |
09-02-2008 | Bosch induction 665E | Hi,
I'd like a circuit diagram so I can repair my induction hob, Bosch 665E/01. Do anybody know where to find this. |
09-02-2008 | | http://www.ptscorp.com |
09-02-2008 | | Check the fuse's on the sustain brd. Unplug the connector if the Vsc doesn't come back up yes a bad PS. |
09-02-2008 | | I've got the service and parts manual here:
http://www.justmanuals.com/sony-micro-hifi-component-system-hcdex5-parts-service-p-10348.html
$9.99 and instant download.
[email protected] |
09-02-2008 | | Hi
I don't see any fuses on the sustain boards, but I'm fairly sure the PSU is OK and that something is tripping it (red led flashes continously). It's only when I disconnect Vcc1 on CN42 that it stays up and running. What I thought was an incorrect Vsc, |
09-02-2008 | | PM me the model # and your email or post the model #. |
09-02-2008 | | Say that again, you unplug CN 42 which goes to the sustain board and the voltage is correct??? |
09-02-2008 | Toshiba 32" LCD analog inputs don't work. 32HLV16 | Hi guys, I have a 32HLV16 Toshiba 32" LCD TV set with built in DVD player and is identical to the 32HLV66 set. The problem with the set is that anything related to analog video, such as S-Video, composite, and component, does not work at all. It yiel |
09-02-2008 | | Yes - unplugging CN42 allows the PSU to start up normally(green led) and all voltages appear to be correct. The same happens by just removing Vcc1(pin 6 of CN42) |
09-02-2008 | amp AB internatinal model 900a | Search for schematic or voltage for power transfo[/code][/quote] |
09-02-2008 | JVC Av-21FMG3B is not starting up | The Tv is JVC Av-21FMG3B is not starting up ,poer is ok but the timer LED is blinking. The voltage on the collector of HOT is reaching about 118v & The Horizontal Transistor ( HOT) is ok & but the tv is not starting up, so what could be the prob |
09-02-2008 | | I came to check that the power on the BU508D is intermittently reading 90 then 85 then 68 then 75 & the same repeatedly , so what might be the problem on ? |
09-02-2008 | 568 proview monitor | I lost my electrical connector for my proview 568 monitor and have found some. one says 6vcd one 7.5 one 12vcd. are any of these usable or what do I need. thanks |
09-02-2008 | Re: 568 proview monitor | [quote="flo"]I lost my electrical connector for my proview 568 monitor and have found some. one says 6vcd one 7.5 one 12vcd. are any of these usable or what do I need. thanks[/quote][code][/code] |
09-02-2008 | | Bad sustain board or bad panel. |
09-02-2008 | | Does the menu work? Do you have the input lock on? Reset Factory Defaults
To reset all settings and channels to their factory
default values:
1 Press Y and open the Setup menu.
2 Highlight Installation and press T. A new set of
Installation menu icon |
09-02-2008 | Newby Help - Gaming wheel - TIP42C transistor fried | I've got a really nice Fanatec Speedster wheel for my 1st gen xbox. Today the force feedback from the right side failed (from the left side still works). I also smelled that nasty electrical smell. So I opened it up and found two transistors labeled TIP42 |