Date | Header | Text |
13-09-2009 | Having problem with Magnavox PTV 835 TV | I have a Magnavox 50" PTV 835 TV. SN 39516967, Date Code May 2000 39101231H. When I turn on the TV the green light lights up, but nothing else happens. No sound, or piture. I checked the fuse ( I only found one fuse ) , and it was fine.
Does any |
13-09-2009 | | Usually replacing the ssb fixes it. (Small Signal Board) |
13-09-2009 | | Hows that "Pionner" working for you... :roll: |
13-09-2009 | | SSB
Ok not to sound like a know nothing, but I know which board is the power supply, & sound board. there is two other boards, one very large, and the other smaller.
The board with the power supply also controls the projectors.
How do I know |
13-09-2009 | | Well, I rushed here to post about my latest "progress report" of torturing the A board just to see your new reply and suggestion.
So I grabbed my magnifying glass, exposed the rear of the monitor to the direct sunlight and start looking for the |
14-09-2009 | | It's a good thing you spotted that spelling error when you did Mr Amp!! We were about to "let it go!"
After 1 year and 8 months!!! :roll: |
14-09-2009 | | you have a data error
usaly this is a df probleme or accesory eroror |
14-09-2009 | | Here is a picture of the old bulbs on the wire
http://i631.photobucket.com/albums/uu40/matthewk0123/IMG_3982.jpg
I'm guessing what you mean by staggering lengths is cutting the old bulbs off from each connecting wire at different points and then joi |
14-09-2009 | | [quote:a1f8418932="minnie"]Up and down or left to right stripes?[/quote:a1f8418932]
I wrote........
"The right side of the panels is lot of stripes,
and some of the picture is gone, "stripy white""
Right side "Up and do |
14-09-2009 | Re: BlueSky (LG) i think PDP 42V5 | [quote:3939adc83d="bitje"]The problem of this screen is no picture and sound at all, power led on the front go on and stay green. On the power supply board the relai clicks and the led on the board go on and of every 6 times.... :( :(
Help help scre |
14-09-2009 | | [quote:c74a3bf3e6="bitje"]Wither more looking i see the 190 volt is missing by power on it com up but only thil a 15 volt and then it falls down,.....
Nobody ???
Greetz Bitje[/quote:c74a3bf3e6]
[quote:c74a3bf3e6="bitje"]
""190 volt |
14-09-2009 | LG PDP 42V5 Partnumber: 3501V00148A APS-197 | I have the fully functionable powersupplyboard,
Partnumber: 3501V00148A
APS-197
and plasmapanel, "same tv-set" for sale!!
Give bid to [email protected]
Pay to Paypal: [email protected] |
14-09-2009 | Re: LG PDP 42V5 Partnumber: 3501V00148A APS-197 | [quote:994601862e="[email protected]"]I have the fully functionable powersupplyboard,
Partnumber: 3501V00148A
APS-197
and plasmapanel, "same tv-set" for sale!!
Place bid, to [email protected]
Pay to Paypal: [email protected][/quote:99 |
14-09-2009 | | How about a service manual, anyone?
Cheers George |
14-09-2009 | | Thanks Minnie!...installed new IC chips and convergence is working fine now, Only problem now is the screen is warped on horizontal and vertical, Do you know if there is a part on the board that may cause this? if so where, so I may order it and replace, |
14-09-2009 | | If you were able to obtain the exact replacement from Yamaha, it would just plug in. Probable ain't gonna happen.
Cut all 4 wire to SAME length, splice ends, solder and insulate - you now have one "blob" at one point along wires.
If you stagge |
14-09-2009 | | This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment
from http://www.justmanuals.com
[email protected] |
14-09-2009 | my 42" LG plasma tv shuts off and on periodicaly | the Y SUS board was replaced but this did not cure the problem
the model # is 42PC1D-UB
any thoughts ? |
14-09-2009 | Hyper board capacitors not the problem | It's been a long time but I replaced the 11 capacitors in the hyper board back in January and the two vertical lines stubbornly remained. Then at the beginning of the summer the convergence problem struck. I did the repair with STK192-150's hoping it migh |