| Date | Header | Text |
|---|
| 17-10-2008 | | thanks for your reply,when the tv is on standby there are no voltages on any of the pins 1-14,when the tv is turned on the voltages are as stated before,then the backlight goes off but the voltages remain the same,i cant understand what is turning the inv |
| 17-10-2008 | | This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |
| 17-10-2008 | backlight/inverter | I have a similar problem with a different model, Benq 26 inch. See my posting a few days ago. I emailed Benq but no reply yet. Mine stays on for about a minute. How long does yours stay on? |
| 17-10-2008 | | [quote:8dc04cbe70="Anonymous"]thanks for your reply,when the tv is on standby there are no voltages on any of the pins 1-14,when the tv is turned on the voltages are as stated before,then the backlight goes off but the voltages remain the same,i cant unde |
| 17-10-2008 | | merci pour ta reponse
sur le site que tu m a donné: http://www.manuals4you.com/
peut on avoir la mise a jour du firm?
pour enlever la macro?
merci de ta reponse |
| 17-10-2008 | | Well, I don't speak French either |
| 17-10-2008 | Hitachi 50DX01B convergence | Trying to get into Convergence Mode . cannot locate the button, not sure if this model had it. |
| 17-10-2008 | | Up front usually left hand side. Remove speaker grill and door and you'll find it. |
| 17-10-2008 | Pioneer A-P510 Amplifier | Hi
Having a few problem with the above amp. Works fine at low volumes when turned up the protection relay keeps clicking on and off. The louder or 'bassier' the sound the more it clicks.
Had it in bits and noticed that the small cpu fan that cools t |
| 17-10-2008 | | I read some of your other replies to that on other models but cant seem to locate nothing that looks like a button...... white or blue |
| 17-10-2008 | | Take it to a shop to get repaired before you get electrocuted!
[email protected] |
| 17-10-2008 | | I was after a more helpful answer than that.. :)
:roll: |
| 18-10-2008 | | 'I'm not too clued up about how to start testing what the fault is.. would apprectiate any pointers... '
My advice is the best advice anyone could give you. It just may save your life.
[email protected] |
| 18-10-2008 | | lamSV - thanks for posting that information about the connector differences. I almost bought one of 3f02's and saw your post . I think I'll just hit up ebay for one of the 3f01's and save myself some time. I also have the Viewsonic n2751w and there doe |
| 18-10-2008 | | Without circuit schematic or familiarity, it is not easy for the average person. I know that some cooling fan circuits were designed to only operate when a specific temperature was reached. Not sure if it's the case here or not? this type of problem could |
| 18-10-2008 | Need Service info for Samsung HCP-4752 | Dear Person:...I just finished replaceing 2 bad convergence IC's in a Samsung HCP-4752... On was actually bad , but I replaced them both with Sanyo STK392-010 IC's..ALL the resistors for both IC's checked OK..I've now noticed that the red horiz on the rig |
| 18-10-2008 | aoc monitor backlight problem | i just found an aoc lm700 moitor myself, and was delighted when i turned it on and watched my boot-up screen - for a moment- then it went black!!! [the backlight went out] i could still faintly see the image in glorious black! my first thought, and i have |
| 18-10-2008 | open heat error fix | Fix for open heat error - worked on Samsung scx 4500 printer
The problem may be caused by dirt getting in between the fuser cylinder and heat sensor. Before ordering a new fuser -which can be expensive - and if you have some experience with electronics |
| 18-10-2008 | Is it possible to change an LCD TV backlight? | Morning All,
A question that has been bothering me for quite a while, is it possible to change a backlight for an LCD TV?
I have done this for laptop screen, but never for LCD TV.
If it is possible, are there any do's or don'ts I should be aware |
| 18-10-2008 | R/p LCD tv backlight/s | Yes- it is done all the time in pro shops(lights only last @1000 hrs!). The place to get them is your tv makers parts supplier- the cost may shock you! around $2-300!. About 10 mins work to r/p. May not be lights(usually is)- could be inverter circuit. |
| 18-10-2008 | | hi ,
unfortunately, nothing better
;-( |
| 18-10-2008 | IBM 6555-773 SERVICE MANUAL | CAN ANY BODY GIVE ME LINK OF IBM 6555-773 MONITOR 20" mY MAIL IS [email protected] |
| 18-10-2008 | | Thanks for the prompt response...!
Can I not take a working backlight from another LCD TV and put it in the one that has a failed backlight?
Cheers |
| 18-10-2008 | Re: R/p LCD tv backlight/s | [quote:e6750a4f4b="Old Bassid"]Yes- it is done all the time in pro shops(lights only last @1000 hrs!). The place to get them is your tv makers parts supplier- the cost may shock you! around $2-300!. About 10 mins work to r/p. May not be lights(usually is |