Date | Header | Text |
08-08-2013 | schematic for Onkyo C-7030 cd player wanted | Hi ,
Can anybody help me with a schematic for this player.
Thanks
Clifford |
10-08-2013 | schematic diagram BEMX Barudan embroidery machine | Dear all guys, Please do you have the schematic diagram of BARUDAN 4530 MOTOR DRIVER BOARD,kindly send to me
Thanks & Regards
Bandu. |
11-08-2013 | Amplificador de audio Denon averiado | Hola, pues eso hasta 1/4 de su volumen funciona bien, pero cuando intentas subirlo más se protege el amplificador y se desconecta, alguien me puede ayudar saludos |
11-08-2013 | Toshiba RDXV59DTKB2 | Hi all
I have a Toshiba Rdxv59dtkb2 for repair ..
fault is that the psu relay clicks constantly on/off green dubbing led turning on/off hdd/vcr/hdd leds stay on .. have checked all the electrolitics in the power supply and have disconnected dvd deck a |
11-08-2013 | re sony tv | As vetch mentioned the g2 settings on this tv is a likely cause to set the g2 volts level select AV with no signal applied then adjust g2 so that flyback lines appear then back off until they disappear .. this was a common problem when I used to repair th |
11-08-2013 | Re: re sony tv | [quote:a5bd8d6059="leo"]As vetch mentioned the g2 settings on this tv is a likely cause to set the g2 volts level select AV with no signal applied then adjust g2 so that flyback lines appear then back off until they disappear .. this was a common problem |
11-08-2013 | tried it, didn't work | Just in case I wanted to find again the original setting for the focus, I made a closeup video of the area, since my eyesight isn't what it used to be, I could always view this and use it to reset the adjustment.
Anyway there are 2 adjustments there, t |
11-08-2013 | service manual for a dbx234xs | Hi all,
I tried looking on the elektrotanya site for a service manual for a dbx234xs unit and although there are quite a few manuals there for dbx models, that one wasn't among them.
So just in case someone can locate that manual, I'm posting a requ |
11-08-2013 | Re: re sony tv | [quote:5405cfc6a5="leo"]As vetch mentioned the g2 settings on this tv is a likely cause to set the g2 volts level select AV with no signal applied then adjust g2 so that flyback lines appear then back off until they disappear .. this was a common problem |
11-08-2013 | | Soldadura conjunta Malo (s) o la conexión (s)? |
11-08-2013 | | [url]http://elektrotanya.com/toshiba_rdxv59_sm.pdf/download.html[/url] |
11-08-2013 | | I usually just take a magic marker and draw a line across the control - that is across the movable part and onto the stationary part so that to put back you just match the marks into a straight line.
Page 24 G2 adjustment [RV5376]
4. Whilst watching t |
12-08-2013 | | [quote:6ce24b5b34="jts1957"]I usually just take a magic marker and draw a line across the control - that is across the movable part and onto the stationary part so that to put back you just match the marks into a straight line.
Page 24 G2 adjustment [R |
12-08-2013 | | G2 is actually NEITHER of those two.
[quote:e24982cccf="spookydd"]That TV turns on and appears to function properly, sound, picture, everything seems normal, but then after 30secs ... [/quote:e24982cccf]
Set with antenna tuned to a station will do, or |
12-08-2013 | | [quote:e9e09a85e8="jts1957"]G2 is actually NEITHER of those two.[/quote:e9e09a85e8]
I get it now, it's that heading "3-3. Focus, Screen (G2) Adjustment" on page 24 that induced me in thinking that G2 had something to do with that adjustment on |
12-08-2013 | | Some slight improvement that may help move forward. Since that little adjustment of a 1/4 turn on that RV5376 allowed the tv to stay on a tiny bit longer, I was able using that remote RM-947 on hand to reach the service menu. However it didn't stay on lon |
12-08-2013 | | Dot gen and 170 Volt supply are external to set. You will NOT be performing ALL steps.
Stay OUT of Service Menus!!!
1/4 turn (presuming 90 degrees) (in either direction) is about 75 degrees of rotation MORE than you'll need. Actually the pot will on |