|08-03-2009||Sharp Microwave R360ES||I am looking for the user manual for the R360ES Platinum Series Sharp Microwave.... I have searched google, yahoo, and have come up with notta!! Any help is greatly appreciated :-) Thank you!!|
|08-03-2009||HCP4752W SAMSUNG CONVERGENCE PROBLEM||I have replaced the sub board using samsung part due to posable updates also replaced convergence card. I can get into service menu and convergence grid to make adjustments but the tv keeps turning off and on i get convergence center lines lined up with n|
|08-03-2009||Samsung Monitor of LE32R3||Goodevening from Greece!
My name is Dimitris! I am dealing with some issues of my monitor. As I was searching the web for some info, I came up to your forum.
I own a Samsung LCD TV (model LE32R3) and the last few days, vertical black shadows are vis|
|08-03-2009||monitor||salut je cherche schéma d'écran Microlux model 769 N et merci|
|08-03-2009||Have you tried any of the Sharp public sites?
|08-03-2009||Can you post a picture?|
|08-03-2009||Put the original 'card' back in and see if it stays on if not you have a new and defective sub board.|
|08-03-2009||What about Q601 and Q602?|
|08-03-2009||Unplug the x & y sustain boards and see it the set stays on.|
Now, whether they have "in stock" or can get, those you'll have to ask them.
You did search by the part number?: TINSEA886WRRZ|
|08-03-2009||Re: top site||[quote:b8d8ed7a12="adam28"]Hi everybody, i would like to say what a great website this is. Keep up the good work.
We try! 8)|
|08-03-2009||RCA d52w19||Hello, I bought the crappy rca , only 3 years old , walmart special...
the power light was coming on blinking 3 times , and the set would shut off.
I found these help websites and started reading .
I decided my problem was the fly back, and a cap. |
|08-03-2009||Check the fuse FL231 near the flyback you replaced.|
|08-03-2009||fuses||Minnie I was hoping you would help me, I checked all 3 of the fuses in that area , all 3 have the spring looking fuse intact
my wife noticed the poor solder on one of the flyback pins, and I resoldered it, and on power up it was LITTLE BETTER
|08-03-2009||I went into setup menu and I do have the CONVERGENCE option (i have been reading up)|
|08-03-2009||Have you gone into the customer menu and touched up the convergence?|
|08-03-2009||ran auto converg and the set is fixed !!!!!!!!!!!!!!!
thank you !!!!!!!!
you made a little girl REAL HAPPY!|
|08-03-2009||[quote:835116ba21="ohfishing"]ran auto converg and the set is fixed !!!!!!!!!!!!!!!
thank you !!!!!!!!
you made a little girl REAL HAPPY![/quote:835116ba21]
That's what were here for! 8)|
|09-03-2009||Ti - 86||Hi I got a problem with Ti-86 which is a line of the screen pixel missing. I tried to increase and decrease the intensity of the screen. Also tried to go to MODE function. I tried that for several times. It works. The line of those screen pixel came back.|
Yes I changed Q601 and Q602
But I don't know why T602 on A board would show continuity between all 5 pins?
|09-03-2009||Thanks for the help. I checked and this TV should support it through the scart connector. Are there any adaptors (brands) that are known to be better or worse than others? Or are they all the same? Thanks again.|
|09-03-2009||T602 is a Line Filter on the "G" board. (The schematic only shows 4 pins).
If you have continuity on all pins...most likely causes:
Plug may be plugged into an isolation transformer and you're reading that; or degauss relay could have "|