Date | Header | Text |
04-01-2011 | Hitachi Television Dead | I have a Hitachi 46F500A projection television that has a "clicking noise" similar to a turn signal on a car with a red LED on front panel blinking at same rate. It will continue to cycle on and off. When the unit comes on, just for the split se |
04-01-2011 | Mitsubishi VS-5042 - No Color/Grey and White ghosting | I have a Mitsubishi 52” projection TV (approx 12 years old). Can only see a ghost image on the screen and no sound. It worked fine until a couple months ago, then the picture started coming and going. If I tapped the side of the TV, the picture would c |
04-01-2011 | | I posted this as a guest... but I no longer am! I have been utilizing this site fo r some time. :D :D :D |
05-01-2011 | | Sounds like the convergence chips have quit working. They are usually located on the main board, attached to a large heat-sink. They are black, about the size of a small cellular phone and are marked "STK-###". If you have any soldering skill |
05-01-2011 | | Convergence or power supply most likely. |
05-01-2011 | | I have taken the connector "PPD5" off. It goes to the deflection. The power supply board's 5 green LEDs and 1 red LED will come on and stay on with this connector off. Just trying to narrow down cause since I don't remember seeing any convergenc |
05-01-2011 | thanks | I got this time. Thanks you so much for your help. Sorry if I seemed like such a pain. |
05-01-2011 | Kenwood PW18-2ATP YB Calibration Procedure | Hi!
Is there anyone out there who could share their knowledge in how to calibrate KENWOOD PW18-2ATP YB. Thanks! |
05-01-2011 | Audi RNS-E Laser | We sell Laser for Audi RNS-E Systems
Special prices for b2b clients and garages and repairstations
Ask us for
[url]http://mt-components.de/index.php[/url] |