|27-11-2009||Phone charging via USB & Wall plug?||Hi....I've recently purchased an LG Incite phone which uses the USB port for charging. It charges either by USB wire when connected to a computer or by a power plug that plugs into the same USB connector on the phone.
I'm wondering how safe & feas|
Anybody help me please to find datasheet for this IC: HA 13267. If you've got
any useful info please send it to my e-mail too: [email protected]|
|27-11-2009||I know, there are tons of sites where I can get it if I pay, I was hoping someone had it and was willing to share it for free... ;)
I have some money on a mturk account, but I can either transfer it to a US account or get gift certificates to buy on am|
|27-11-2009||Toshiba 34HF85, M3U01T Chassis||This is a large CRT set assembled in 2005 which recently suffered a power surge. The set switches on, produces a raster for a few seconds and shuts down.
The B+ is generated from an SMPS. The B+ is fed back to provide the reference voltage to a shunt |
|27-11-2009||5028 Doc Feeder||(cont) If the ready light on the console is Red,wave a magnet over the rear/left of the cover (by the platten glass) the ready/not ready light should change,which would mean the reed switch under the cover is ok.Now with the doc feeder in the up position |
|27-11-2009||NICE , All clear !!!!!!!!!!!!!
I will try to found some Samsung service manual, because my Fujitsu is all Samsung inside, all boards are Samsung.
LJ41-02331A LJ92-01054A (E) left board
LJ41-02332A LJ92-01055A (F) right board
|27-11-2009||In general, the current draw is limited to no more than 500ma through a USB by design limitation regardless of the device. Depending on the device in question, as long as you are below 500ma, you should be OK. (hence the reason for wanting to use a separa|
|27-11-2009||Toshiba32av500u backlight inverter||It appears that I have a common problem with this model of Toshiba product. When the TV is on, green light is present as well as audio, but the picture is absent, (atleast 99%). I'm limited with electronics anything beyond locating/replacing requires a |
|27-11-2009||One question !!!!!
My Logic board : pba no : LJ92-01270A/B/C/D/E/F/G/H/J/[b:626a4d2ecb]K[/b:626a4d2ecb]/L/M
Pba rev : A2
I found : pba no : LJ92-01270A/B/C/D/E/F/G/H/[b:626a4d2ecb]J[/b:626a4d2ecb]/K/L/M
Pba rev : A2