Date | Header | Text |
16-07-2008 | konica 7045 b/w copier | i have konica 7045 b/w copier
from all the paper trays the first made copy is ok. when want more than one copy ;copy counter 2 or more it makes the first one ok ,but the next
one shifts verticaly in the subscan direction ,the shift increases by the co |
16-07-2008 | Kenwood A-45 model | I unplugged the wires at the back of my kenwood home music system for cleaning but when I fixed them back the tuner and the deck recorder/player are not working. All sockets are in the right places and all wires are ok. what could have happened? can anyon |
16-07-2008 | ultravox flyback transformer | i need to buy an Ultravox flyback transformer with part no BSC24-0958 or 65498-03B or 2003.12.02 used in model CAS-2106
THANKS |
16-07-2008 | | what is more likely with a set of that age is that the crt is on its last legs and it is taking 5-10 minutes for the crts emission to reach the point where the auto grey scale can balance the drives correctly, tweaking of the A1 control and/or short circu |
16-07-2008 | | its faulty, on the back is a sticker, on the sticker is the make and model number, posting this information makes it a lot easier for people to help!! |
16-07-2008 | Creative Inspire 5300 Speakers ...... | This morning my speakers gave up working. Now the light doesn't appear and a loud humming sound comes from the subwoofer.
I was thinking of buying another, but I thought about repairing it myself.
I looked inside, but no burnt out parts. What woul |
16-07-2008 | technics 290 not switching on | i have a technics hifi 290 and every time i try to turn on it turns off.any ideas |
16-07-2008 | emachine running slow | i have a emachine over time it has got slow i rebooted it but it still seems slow when opening web pages or programmes.any ideas what to do ? |
16-07-2008 | technics 290 not turning on | i have a technics 290 when i try to turn on it just makes a click noise does not turn on .any clues what it could be |
16-07-2008 | kv-2192me3 sony tv | hi all
we have a tv sony model 2192m3 in the my tv there is a falt that. we havent picture but we have sound. when we turn on tv bargraph of sound ,brithness and... is shows uper than the normal case we things the picture in the vertical case is falter |
16-07-2008 | Bose spaker upgrade!! | Can any one help, I have a current lifestyle 18 system with the single cube speakers x5 and a acoustimass box. Wondered if i can get better quality sound from upgrading to the "jewel" twin speakers with the adaptq center. I have been told that i |
16-07-2008 | sa32wn4 picture not showing full | i got a sanyo crt tv when turned on the picture height is reduced and the sides of the picture is curved.any ideas |
16-07-2008 | | Minnie- Thanks for your help. I'll keep you posted after I change the caps. Thanks, Dennis |
16-07-2008 | need this service manual TC-21FS10MG | anyone got it |
16-07-2008 | | This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from http://www.justmanuals.com
[email protected] |
16-07-2008 | | Whats the matter with Bose? I've got 2 Bose systems in my house and once of our cars has a Bose system in it too.
[email protected] |
16-07-2008 | | Good point: TX-32DK1F |
16-07-2008 | PackratKing ? | Good Morning!
My moniker sums up an obsession of 45 some odd years.
Part of that OCD is scavenging, curb-crawling, or "dumpster diving" anything that can be repaired for resale, or provide a source of useable components. I have an invento |
16-07-2008 | | MEASURE THE CATHODE VOLTAGES ON THE CRT SOCKET, (MARKED R, G, B,) IF THEY ARE ALL THE SAME THE CRT HAS FAILED. UNFORTUNATELY QUITE A COMMON PROBLEM. |
16-07-2008 | bush lcd26tv005 hd | hi i havea problem withthis set in that it goes to standby intermittently, itwont respond to heating freezing or prodingits pretty random with (as far as i can tell) only the 5vrail staying present any ideas please |
16-07-2008 | code removal | just curious to know if anyone knows how to get a kenwood kdc 9020r into code removal status. i've tried the service manual but it gives the wrong instructions. i need to know which two buttons to push to get it out of the code entry stage. |